Bike Stands

Terra-Plus bike stand – for indoor and outdoor use

The Terra-Plus is extremely flexible: it is available in three heights – ‘low’, “medium” and ‘high’ – and can also be mounted at a 45° angle. The rim holder also works with bikes with disc brakes. The stand can accommodate tyres up to a maximum of 2.3 to 2.4 inches.

Dimensions: width 8 cm (inner width 6 cm standard), depth 55 cm, height ‘low’ 63.5 cm, ‘high’ 86.5 cm, C-rail height 2.5 cm, max. length 3 m

Assembly: Secure the C-rail to the ground using dowels or ground anchors. Screw the stand to the C-rail using hexagonal screws and a perforated plate as a counterpart.

Download: Product sheet Terra-Plus + Scuro-Plus, Space requirements table (space requirements and length of C-rail)

Accessories: For Terra-Plus ‘high’ entry rail (Velo-Kuve), Securo-Plus connection bracket anti-theft device.

Special features: C-rails can be connected using an intermediate piece. Do not place the stands too close together, see image ‘Space requirement’ and space table. We also offer the ‘medium’ height for the Bike Roof.

Terra-Plus XL and XXL bike stands – the oversized models

The standard width for bike tyres is max. 60 mm. Our Terra-Plus XL and XXL models can accommodate oversized tyres from 2.4 to 4.7 inches.

Dimensions: Width XL 90 cm, XXL 120 cm

Assembly: Same as Terra-Plus

Accessories: Same as Terra-Plus

Special features: Can be combined with the standard version.

Rock bike rack – bikes lined up in neat rows

The Rock bicycle rack has been tested and recommended by the German Cyclists’ Club. It features integrated mounting brackets at the front and rear and can be fitted on one side or as a double unit (end-to-end). The bracket accommodates MTB tyres up to 70 mm wide (55 mm recommended). Like the Terra-Plus, the Rock cycle rack is mounted at staggered heights, allowing for a high parking density. Also available in a 45-degree angle.

Dimensions: Width 15 cm, Depth: 33 cm, Height ‘low’ 74 cm, ‘high’ 98.5 cm

Installation: Using steel screws on trapezoidal rails at intervals of 40, 45 and 50 cm. The structure is already stable with the rails alone. Nevertheless, it is recommended to anchor them to solid ground using wall plugs. For 45° positioning, separate rails with staggered holes must be used.

Downloads: Assembly instructions and space table for Rock (German only)

Accessories: –

Special features: Modules for 3 to 5 bikes available. Rail lengths 135 to 270 cm and 200 to 250 cm, depending on the number and spacing of the bikes

Easy-Parker bicycle rack

This bicycle rack has an integrated anti-theft device. Bicycles can be locked to the slotted blades. The metal is coated with a duplex coating (epoxy and polyurethane plastic coating) to protect the bicycle frames. For tight spaces, the Easy-Parker is also available in a 45° angle. The Easy-Parker can also be used in bicycle shelters.

Dimensions: Base plate width 120 cm for 3 bicycles, depth 16 cm, height 90 cm

Assembly: Screw onto solid ground using dowels only, seamless assembly possible.

Accessories: –

Special features: Elements for 3 to 5 bikes available. Please specify the angle of the arms when ordering: left 22 o'clock, right 14 o'clock.

HE bike rack – the classic

The HE bike rack can be mounted using a wall bracket or floor supports. It is therefore particularly popular in bike cellars. The HE is a modular system with brackets in a high and low arrangement. A 45° angle is also possible. With floor supports, bikes can also be parked on both sides. The upper retaining ring is covered with a plastic sleeve to protect the rim. Can also be used in bike shelters.

Dimensions: See sketches and assembly instructions. For slopes > 10 cm, the floor supports must be mounted offset. Maximum distance between supports on one side 3.5 m; on both sides 2.5 m.

Assembly: Only on solid ground or on the wall using dowels.

Download: Assembly instructions for HE bicycle holder and hooks

Accessories: Loop cable for securing

Penguin Parc – the practical kickboard stand

Reminiscent of a penguin, the belly of this kickboard stand provides storage space for all standard types of scooters and kickboards. It is easy to use and its fun design encourages correct parking. The holes are used to secure the scooters.

Dimensions for 5 kickboards: Length 100 cm, height 31 cm, depth 21.5 mm

Weight/material: 12.5 kg, chrome steel

Assembly: holes for floor or wall mounting, use chrome steel screws outdoors

Special features: can also be placed head to head; can be lined up to form a multiple parking system for nurseries, primary schools and daycare centres